How to Clean Water Inlet Valve on Washing Machine: Step by Step

You may have noticed that your washing machine’s laundry process is much slower than before, and you may be worried about these issues. The stack of sand, dirt, and grit into the water inlet valve is the main culprit behind the slow filling, which gets stuck directly from your home plumbing systems and slows down the inlet valve water speed.

Don’t worry! You do not have to go to any plumber or mechanic to solve this problem quickly; you can easily do LG, SAMSUNG washing machine water inlet valve cleaning in your home by following a few simple procedures. In this field, we will ultimately assist you in how to clean water inlet valve on washing machine easily, so let’s start our tour without wasting time.

Before we move on to our main guide, let’s get acquainted with the inlet/fill valve and how it does fill valve work; it will help you to understand the following process more efficiently.

How Does Water Inlet Valve Work?

As you know, during the installation of the washing machine, it is directly connected to your home’s plumbing system. During laundry, which supplies water to the washer, and then when you add the proper amount of detergent and then start it, it starts cleaning by pumping water like cycling.

But when your clothes move to the end of the cleaning process, the water inlet valve helps to refill and dry them. In your water inlet valve filter screen, you will notice rust, dirt, and other things stuck due to not cleaning for long periods or because of the dust particles around the old house pipes.
Hence, experts recommend; cleaning your washing machine’s water fill valve at least once in 6 months or 1 year.

How to Clean Water Inlet Valve on Washing Machine

How to Clean Water Inlet Valve on Washing Machine

In most forums, many people want to know how to clean water inlet valve on LG washing machine, how to clean water inlet valve on whirlpool washer, and many more things. Anyway, firstly you need to know that almost all brands of washing machines’ fill valves are the same, and their cleaning process is similar.

So there is nothing to worry about with which model and brand of washing machine you are using. In this section, we will guide the whole thing step by step.

Before Starting You’ll Need

  • Slip Joint Pliers
  • Needle Nose Pliers
  • Utility Knife
  • Hand Towel

After taking the above tools with you, follow our next steps.

Step #1

One thing to remember, before doing any work on electric devices and machines, you must unplug it from the electric line, in the same way, unplug the main cable of your washing machine, because safety first!

Step #2

If your washing machine is close to the wall, push it to a suitable place, from where you can easily access the rear part of your washer. However, before that, you must try to remove the washing machine carefully and refrain from taking it too far, as there is a risk of damage to the water supplier and drain hose of the washing machine.

Step #3

Then turn off the water supply valve. If you look carefully behind the washer, then you can see that there are two valves, which basically supply hot and cold water to the washing machine inlet.

Step #4

In this step, with the help of pliers, we will carefully remove the water supply hoses. At this point, you can keep a bucket or towel with you because when you remove the hoses, there is a chance that the stucked water will roll over from the hoses, so that before the stucked water wet your floor, try to clean it immediately.

Step #5

Take a fair look at whether you can see any issues. Then with the help of needle-nose pliers, remove the inlet screen, then you can see a lot of dirt stuck here; if you want to easily clean the stuck dirt from the screen, you can use your finger or toothbrush also use vinegar solution for complete cleaning.

Step #6

After thoroughly cleaning the inlet valve screen, then insert them into the inlet valve, and then attach the water hoses tightly with the washing machine to prevent any leakage issues. Then place the washing machine perfectly in the previous position.

Step #7

Then plug in the washing machine cable, and start it without inserting any clothes. Make sure everything in the washing machine is working correctly, and check if there is any leakage in the water supply hoses. I think everything is going well, and your cleaning process is Done!

Related Topic:

FAQ: Frequently Asked Questions

Why does my washer drip water inside?

It can happen for several reasons, but some common ones are that your washer’s water hoses are clogged, damaged, or loose. You can also check the water valve. Otherwise, if there is water leakage inside the washer tub, then check the water inlet valve properly.

Why does the water inlet valve fail?

It is not a problem with the system of your washing machine; it is mainly caused by dirt stuck in the inlet port for a long time. However, in this case, you can simply clean or fix your inlet valve to back your washing machine’s performance in the previous position.

How much does it cost to replace a washing machine inlet valve?

Washing machine inlet valve replacement does not cost much; you can easily replace it within $50 to $120.

Wrapping Up

Cleaning the water inlet valve on washing machine is not a difficult task; you can simply clean it by following our above method. I think we have been able to explain to you how to clean water inlet valve on washing machine efficiently in a simple way.

However, one more thing remains, if you notice during the fill valve cleaning that the piece of dirt is too much, and cleaning it becomes very challenging, or even after cleaning the inlet valve, your washing machine is working slowly as before. Then we highly recommend that you replace the water inlet valve. It will give you fast laundry performance as a new washing machine.

Leave a Comment